Experience with Brimotech
Very competent and pleasant service
The gas springs fit our system perfectly thanks to Brimotech’s correct calculations. Thank you for your advice!
– Jaap van Dolder
End fittings
Connection parts are fastening components that ensure correct mounting of gas springs in an application. The right end fitting are of great importance for proper mounting and optimal lifetime of our gas springs and dampers . The choice of material depends on the environment and load. Steel is sturdy and suitable for standard industrial applications, plastic is light and ideal for non-corrosive environments, and stainless steel 316 offers optimal corrosion resistance for marine and outdoor environments. Our specialists will be happy to advise you which material best suits your situation.
Combining end fittings with other fastening components for more flexibility
In some cases, we combine different types of end fittings, such as rod heads with brackets, to handle complex mounting requirements. This offers extra flexibility in applications where mounting positions are limited. Our experts can
advise you on special options.
Specific end fittings for gas springs in extreme conditions
Brimotech offers end fittings designed for extreme conditions, such as high temperatures, high forces and corrosive environments. Our experts can advise you on special options, such as high-grade steel with special coatings or stainless steel 316 with additional seals.
Wide range of end fittings for every gas spring
In our standard programme, you will find a wide range of end fittings from ball joints, eyelets, clevis and rod ends to brackets. We also make custom-made connecting parts. We have a wide range of end fittings in stock. You therefore benefit from fast delivery. All types of connections in steel, plastic or stainless steel are possible. You will always find the right connector for your gas springs. Order your end fittings at Brimotech and benefit from:
- End fittings for any type of gas spring;
- Years of experience in mechanics;
- Customised calculations for end fittings;
- Delivery possible within 24 hours in the Netherlands, if in stock in our own warehouse.
Ball joints
Ball joints are especially suitable when it is difficult to mount the gas spring in a straight line between the two pivot points. A ball joint prevents an excessive load from the piston rod being placed on the guide piece. This promotes the service life of the gas spring.
Eyelets with threads
Eyelets allow us to ensure the correct overall size with a standard gas spring. This gas spring is equipped with a thread. We supply eyes in many different sizes and in various types. We are happy to help you get the right type of eye for your gas spring.
Clevis
Do you have a gas spring in which the connection part has to deal with high pressures and/or loads? Then a clevis is a suitable solution. Clevises can handle heavy impact and tensile forces. It is important to keep in mind during assembly that you mount your gas spring in a straight line between the mounting points.
Rod ends
Looking for an end fittings that you can use in a construction where a combined axial and radial load can occur on the connecting parts? Choose a rod head. Our rod heads feature low frictional resistance and require no maintenance after installation.
brackets
Is it not possible to mount the gas spring, equipped with your connection parts, directly in your application? Then our brackets are often a good solution. We have these in stock in galvanized steel and stainless steel 316 in a number of standard versions. Of course, we also produce customer-specific brackets.
tailor made end fittings
Looking for a specific end fitting? No problem. We are happy to develop this for you on a custom basis. In fact, at Brimotech we have our own engineering and production capacity in Italy. So we can provide you with any end fitting you need for your gas spring. Whether it is a different rod head or a ball joint. We are happy to produce the perfect end fitting for you.
